G SERIES · TWO-POLE SUBMERSIBLE GRINDER PUMP

G 0.75-5.5 kW 2P grinder pump range

One product family with eight hydraulic selections, eight exact catalog codes and sixteen current configurations. Matching SF float-switch codes remain outside the page count.

Select a G configuration →Compare models

● 0.75-5.5 kW · 8 models · 16 configurations

MEUDY G 50G25.5 two-pole submersible grinder pump — Current catalog image assigned to 50G25.5 · shared across 50/60 Hz records

Series Overview

Key specifications shared across the G 0.75-5.5 kW series.

R / Y / ZSoft pipe, hard pipe or auto-coupled

50 / 60 Hz3000 / 3600 rpm synchronous speed

8 mCable length

10 mMaximum immersion depth

Published data specifies IP68 protection, class F insulation, built-in motor protection, water temperature up to 40°C and pH 6-10. Three-phase rows use 380 V +/-10%; the listed S and SF rows up to 1.1 kW use single-phase 220 V at both frequencies.

Model Range

Compare hydraulic performance across all available power ratings.

Eight performance selections, 40 mm and 50 mm outlets. Published data uses one combined 50/60 Hz row per selection. Rated and maximum cells show flow / head in GPM / ft.

Model	Phase	Voltage V	Motor HP	Outlet mm	Rated flow / head GPM / ft	Max flow / head GPM / ft	Cable mm²
40G2.75	3~	380	1.0	40	35.2 / 32.8	52.8 / 49.2	1.0
40G2.75S	1~	220	1.0	40	35.2 / 32.8	52.8 / 49.2	1.0
40G21.1	3~	380	1.5	40	35.2 / 39.4	57.2 / 55.8	1.0
40G21.1S	1~	220	1.5	40	35.2 / 39.4	57.2 / 55.8	1.0
40G21.5	3~	380	2.0	40	44.0 / 45.9	79.3 / 59.1	1.0
40G22.2	3~	380	3.0	40	44.0 / 72.2	88.1 / 85.3	1.0
50G23.7	3~	380	5.0	50	66.0 / 82.0	110.1 / 98.4	1.5
50G25.5	3~	380	7.4	50	66.0 / 124.7	110.1 / 137.8	2.5

SF float-switch codes are current electrical configurations, not additional published hydraulic rows.

MEUDY G 40G2.75, 40G2.75S, 40G21.1, 40G21.1S submersible grinder pump catalog image

40 MM STANDARD / S · 0.75-1.1 KW

40G2.75 / 40G2.75S / 40G21.1 / 40G21.1S

One of five content-distinct catalog images; the listed exact codes share this assignment.

MEUDY G 40G2.75SF, 40G21.1SF submersible grinder pump catalog image

40 MM SF FLOAT SWITCH · 0.75-1.1 KW

40G2.75SF / 40G21.1SF

One of five content-distinct catalog images; the listed exact codes share this assignment.

MEUDY G 40G21.5, 40G22.2 submersible grinder pump catalog image

40 MM · 1.5-2.2 KW

40G21.5 / 40G22.2

One of five content-distinct catalog images; the listed exact codes share this assignment.

MEUDY G 50G23.7 submersible grinder pump catalog image

50 MM · PUBLISHED 3.7 KW

50G23.7

One of five content-distinct catalog images; the listed exact codes share this assignment.

MEUDY G 50G25.5 submersible grinder pump catalog image

50 MM · 5.5 KW

50G25.5

One of five content-distinct catalog images; the listed exact codes share this assignment.

Configurations

Available 50 Hz / 60 Hz electrical configurations for each model.

Counted page codes are the base and S forms (8 codes × both frequencies = 16 records). Matching SF float-switch codes (40G2.75SF, 40G21.1SF) are not added to this count. Raw outlet gaps and published/catalog differences remain visible.

Exact code	Hz	Phase	Voltage V	Power HP	Outlet mm	Rated flow / head GPM / ft	Max flow / head GPM / ft	Drawing
40G2.75	50	3~	380	1.0	-	35.2 / 32.8	52.8 / 48.9	View
40G2.75	60	3~	380	1.0	40	35.2 / 32.8	53.3 / 48.9	View
40G2.75S	50	1~	220	1.0	-	35.2 / 32.8	52.8 / 49.5	View
40G2.75S	60	1~	220	1.0	40	35.2 / 32.8	52.0 / 48.9	View
40G21.1	50	3~	380	1.5	-	35.2 / 39.4	58.6 / 56.4	View
40G21.1	60	3~	380	1.5	40	35.2 / 39.4	57.2 / 54.8	View
40G21.1S	50	1~	220	1.5	-	35.2 / 39.4	58.1 / 56.4	View
40G21.1S	60	1~	220	1.5	40	35.2 / 39.4	57.2 / 55.1	View
40G21.5	50	3~	380	2.0	-	44.0 / 45.9	79.3 / 58.7	View
40G21.5	60	3~	380	2.0	40	44.0 / 45.9	79.3 / 57.4	View
40G22.2	50	3~	380	3.0	-	44.0 / 72.2	88.1 / 85.6	View
40G22.2	60	3~	380	3.0	40	44.0 / 72.2	88.1 / 85.0	View
50G23.7	50	3~	380	5.4	-	66.0 / 82.0	110.1 / 98.1	View
50G23.7	60	3~	380	5.4	50	66.0 / 82.0	106.1 / 96.1	View
50G25.5	50	3~	380	7.4	-	66.0 / 124.7	107.9 / 137.8	View
50G25.5	60	3~	380	7.4	50	66.0 / 124.7	105.7 / 138.4	View

Current catalog differences: all ten 50 Hz outlet fields are empty. Both 50G23.7 records state 5.36 HP while published data states 4.96 HP. Published data lists 110 GPM maximum flow for 50G23.7 and 50G25.5; current records state 110 / 106 and 108 / 106 GPM at 50 / 60 Hz. Confirm before quotation.

Dimension drawing for MEUDY 50G25.5 50 Hz configuration

Representative catalog drawing · 50G25.5 · 50 Hz

Construction

Cast-iron body, high-chrome grinder blades.

Discharge / pump body: Cast iron / cast iron
Motor body / impeller: Cast iron / cast iron
Rotational / stationary blade: High chrome alloy / high chrome alloy
Rotor shaft: AISI 420 stainless steel
Bearings: Ball bearings
Mechanical seal: SiC-SiC / carbon-ceramic

SOURCE & REVIEW

Evidence stays tied to this G entry.

01

Published source

MEUDY sewage pump catalog 2026.6.6, printed pages 74-77 with specifications, grinding examples, materials, 50/60 Hz curves and R, Y and Z dimensions.

02

Current catalog

Sixteen counted frequency records come from current English G base and S codes; SF float options remain outside the count.

03

Confirmation

The 50G23.7 power conflict, maximum-flow differences, empty 50 Hz outlets, certification scope and North American suitability require confirmation.

G SERIES FAQ

Selection questions answered from evidence.

How many models are in the G 0.75-5.5 kW 2P range?

Published data groups eight hydraulic selections in this G entry. Counted page codes are the base and S forms (8 codes, 16 frequency records). Matching SF float-switch codes 40G2.75SF and 40G21.1SF remain outside that count.

What do the S and SF codes mean on this page?

Published data table identifies the S rows as single-phase 220 V and explicitly states that G...SF is single phase with a float switch. No broader suffix rule is inferred for other families.

Does every current G configuration have both frequencies?

Yes. Each of the ten matching catalog codes currently has one 50 Hz record and one 60 Hz record. The page keeps their measured values separate even where published data uses one combined row.

Why is 50G23.7 power flagged?

Published data identifies 50G23.7 as 4.96 HP, while both current catalog records state 5.36 HP. Confirm the approved rating before quotation.

Is the G 7.5-11 kW range included here?

No. Published data starts G 7.5-11 kW 2P as a separate product entry on the following pages, so 50G27.5 and 50G211 are not merged into this page.

Continue from published data to a reviewed selection

Confirm motor rating, frequency and duty point.

← Z 0.75-7.5 kW 2P Open G in the selector →