PV(M) SERIES · SUBMERSIBLE WASTEWATER PUMP
Lightweight drainage.
Built for solids.
A corrosion-resistant stainless-steel and resin pump platform for wastewater transfer, sewage drainage and rainwater duties where foreign matter may enter the water. Counted page codes exclude float-switch suffixes.
● 0.25-0.75 kW · 6 models · 8 configurations
POWER0.3-1.0 HP
MAX FLOW97.7 GPM
MAX HEAD45.3 ft
SOLIDS35 mm
Series Overview
Key specifications shared across the PV(M) series.
The PV(M) series combines an AISI 304 stainless-steel motor casing with engineered resin hydraulic parts. Its vortex impeller and 35 mm passage are designed to reduce clogging when wastewater contains foreign matter.
Model Range
Compare hydraulic performance across all available power ratings.
Published data groups three hydraulic selections under PVM. Counted page codes are the non-float PV/PVM forms (6 codes, 8 frequency records). PV identifies three-phase and PVM single-phase. Single-phase models can be configured with a float switch; trailing-F codes are not separate counted rows.
AVAILABLE CATALOG IMAGE
40PVM2.25 / 50PVM2.25
One of four content-distinct images shared by the listed current catalog codes.
FLOAT-SWITCH CATALOG IMAGE
40PVM2.25F / 50PVM2.25F
Float-switch photography retained for reference; float codes are not counted table rows.
AVAILABLE CATALOG IMAGE
50PV2.4 / 50PV2.75 / 50PVM2.4 / 50PVM2.75
One of four content-distinct images shared by the listed current catalog codes.
FLOAT-SWITCH CATALOG IMAGE
50PVM2.4F / 50PVM2.75F
Float-switch photography retained for reference; float codes are not counted table rows.| Performance row | Power HP | Outlet mm | Rated flow / head GPM / ft | Maximum flow / head GPM / ft | Passage mm |
|---|---|---|---|---|---|
| 40/50PV(M)2.25(F) | 0.3 | 40 / 50 | 35.2 / 16.4 | 52.8 / 24.6 | 35 |
| 50PV(M)2.4(F) | 0.5 | 50 | 39.6 / 19.7 | 74.0 / 31.2 | 35 |
| 50PV(M)2.75(F) | 1.0 | 50 | 52.8 / 29.5 | 97.7 / 44.3 | 35 |
Published data table is a shared 50/60 Hz family summary. Frequency- and phase-specific current catalog values remain separate below.
Configurations
Available 50 Hz / 60 Hz electrical configurations for each model.
Counted page codes exclude float-switch suffixes. Every published 50 Hz and 60 Hz record for those codes is listed. Single-phase models can be configured with a float switch (40PVM2.25F, 50PVM2.25F, 50PVM2.4F, 50PVM2.75F), but those float codes are not separate table rows.
| Exact code | Hz | Phase / V | Power HP | Rated flow / head GPM / ft | Max flow / head GPM / ft | Outlet / passage mm | Cable m | Drawing |
|---|---|---|---|---|---|---|---|---|
| 40PVM2.25 | 50 | 1 / 220 | 0.3 | 35.2 / 16.4 | 52.8 / 24.6 | 40 / 35 | 8 | View |
| 50PVM2.25 | 60 | 1 / 115 | 0.3 | 35.2 / 16.4 | 52.8 / 23.6 | 40 / 35 | 8 | View |
| 50PV2.4 | 50 | 3 / 380 | 0.5 | 39.6 / 19.7 | 74.0 / 31.2 | 50 / 35 | 8 | View |
| 50PV2.4 | 60 | 3 / 380 | 0.5 | 39.6 / 19.7 | 74.0 / 30.8 | 50 / 35 | 8 | View |
| 50PVM2.4 | 50 | 1 / 220 | 0.5 | 39.6 / 19.7 | 74.0 / 31.2 | 50 / 35 | 8 | View |
| 50PV2.75 | 50 | 3 / 380 | 1.0 | 52.8 / 29.5 | 96.9 / 45.3 | 50 / 35 | 8 | View |
| 50PVM2.75 | 50 | 1 / 220 | 1.0 | 52.8 / 29.5 | 96.9 / 44.3 | 50 / 35 | 8 | View |
| 50PVM2.75 | 60 | 1 / 115 | 1.0 | 52.8 / 29.5 | 97.7 / 44.6 | 50 / 35 | 8 | View |
Frequency coverage: 40PVM2.25: 50 Hz published; 60 Hz customizable; 50PVM2.25: 60 Hz published; 50 Hz customizable; 50PVM2.4: 50 Hz published; 60 Hz customizable; 50PV2.75: 50 Hz published; 60 Hz customizable. Where a counterpart frequency is not listed, that frequency is customizable rather than invented as a table row. Phase / V shows 115 V on single-phase 60 Hz rows (NA default).
Catalog voltage cells retain source values. The North American default single-phase supply shown in the summary band is 115 V for families with 60 Hz configurations.
Published data rounds the 0.75 kW family maximum to 97.7 GPM at 44.3 ft. Current records include frequency-specific decimals; confirm the approved curve before quotation.
Construction & materials
Corrosion-resistant where it matters.
The material stack is taken from the PV(M) published construction table. Exact supplied materials remain subject to the confirmed model configuration.
- Motor casing
- AISI 304 stainless steel
- Pump body
- ABS
- Impeller
- PPO
- Shaft
- AISI 304 stainless steel
- Mechanical seal
- SiC-ceramic / ceramic-carbon
- Cable
- H07RN-F
HOW TO SELECT
Match the pump to the duty, not the maximum number.
- 01Define flow and head
Use the required operating point and review the complete 50 Hz or 60 Hz performance curve.
- 02Choose the electrical version
Select PV for three-phase or PVM for single-phase supply. Single-phase models can be configured with a float switch when required.
- 03Confirm installation details
Verify outlet connection, cable, dimensions, liquid chemistry and accessory scope in the quotation.
PV(M) FAQ
Questions buyers ask before selection.
Why are all PV(M) models on one page?
Published data defines one PVM series block with three hydraulic selections. PV and PVM electrical choices remain exact configurations inside that group.
What is the difference between PV and PVM?
According to published data nomenclature, PV is the three-phase version and PVM is the single-phase version.
Can single-phase PV(M) models be configured with a float switch?
Yes. Single-phase models can be configured with a float switch. Trailing-F float codes are not listed as separate counted rows in the configuration table.
Can PV(M) pumps handle wastewater containing solids?
The vortex impeller and large passage are intended for wastewater containing foreign matter. The listed impeller passage is 35 mm; the actual liquid and solids must still be checked for the application.
Why do some codes show only one frequency?
The table lists every published 50 Hz and 60 Hz catalog record for the six counted codes. Where a counterpart frequency is not in the current English catalog, that gap is disclosed rather than invented.
Have a required flow and head?