C SERIES · TYPE T TWO-POLE SEWAGE PUMP

C 0.75-1.5 kW 2P Type T sewage pump

One product family with two hydraulic models and four current 50/60 Hz catalog configurations.

Select a Type T configuration →Compare models

● Published pages 61-63 · 2 exact codes · 4 catalog configurations

MEUDY C 80C21.5T Type T sewage pump — Current catalog image assigned to 80C21.5T · shared by 50/60 Hz records

Series Overview

Key specifications shared across the C 0.75-1.5 kW 2P Type T series.

Y / ZHard pipe or auto-coupled

Built inMotor protection

8 mCable length

10 mMaximum immersion depth

Published data specifies IP68 protection, class F insulation, three-phase 380 V +/-10% at 50 Hz and 60 Hz, water temperature up to 40°C and pH 6-10. Current 60 Hz catalog voltage fields conflict with that published value.

Model Range

Compare hydraulic performance across all available power ratings.

Two published models, 50 Hz and 60 Hz side by side. Rated and maximum columns show flow / head in GPM / ft. Frequency-specific values are not copied across columns.

Model	Motor HP	Outlet mm	50 Hz rated / max GPM / ft	60 Hz rated / max GPM / ft	Passage mm	Cable mm²
50C2.75T	1.0	50	15 / 6 23 / 12	18 / 5 23 / 12	20	1.0
80C21.5T	2.0	80	27 / 7 52 / 13	27 / 8 50 / 14	40	1.5

For each frequency column, the first line is rated flow / head and the second line is maximum flow / head.

50 MM OUTLET · 0.75 KW

50C2.75T

One distinct current catalog image is assigned to both frequency records for this model.

80 MM OUTLET · 1.5 KW

80C21.5T

One distinct current catalog image is assigned to both frequency records for this model.

Configurations

Available 50 Hz / 60 Hz electrical configurations for each model.

Both models have 50 Hz and 60 Hz records; both 60 Hz records state a voltage that conflicts with published data.

Exact code	Hz	Phase / V	Power HP	Outlet mm	Rated flow / head GPM / ft	Max flow / head GPM / ft	Drawing
50C2.75T	50	3 / 380	1.0	50	66.0 / 19.7	101.3 / 39.4	View
50C2.75T	60	3 / 220	1.0	50	79.3 / 16.4	101.3 / 40.4	View
80C21.5T	50	3 / 380	2.0	80	118.9 / 23.0	229.0 / 42.7	View
80C21.5T	60	3 / 220	2.0	80	118.9 / 26.2	220.1 / 46.6	View

Current catalog conflicts: 50C2.75T and 80C21.5T at 60 Hz both state three-phase 220 V, while published data specifies three-phase 380 V +/-10% at both frequencies. The catalog also states 12.3 m and 46.6 ft maximum head at 60 Hz where published data table lists 39.4 ft and 14 m. Confirm before quotation.

Dimension drawing for MEUDY 80C21.5T Type T configuration

Representative catalog drawing · 80C21.5T · shared by 50/60 Hz records

Construction

Cast-iron body, ductile-iron inlet plate.

Discharge / flange plate: Cast iron / cast iron
Pump body / motor body: Cast iron / cast iron
Impeller / inlet plate: Cast iron / ductile iron
Rotor shaft: AISI 304 stainless steel
Bearings: Ball bearings
Mechanical seal: SiC-SiC / carbon-SiC

SOURCE & REVIEW

Evidence stays tied to this Type T entry.

Published source

MEUDY sewage pump catalog 2026.6.6, printed pages 61-63 with specifications, materials, 50/60 Hz curves and Y and Z dimensions.

Current catalog

Four exact frequency, voltage, product-image and dimension assignments come from current English C(T) records.

Confirmation

The 60 Hz voltage conflict, maximum-head precision, certification scope and North American suitability require confirmation.

C TYPE T FAQ

Selection questions answered from evidence.

Which models are in the C 0.75-1.5 kW 2P Type T range?

Published data Type T entry contains 50C2.75T and 80C21.5T. Each model has separate 50 Hz and 60 Hz records in the current catalog.

Is Type T part of the regular C 0.75-7.5 kW page?

No. The published data gives Type T its own product entry, specifications, curves and dimensions, so it has a separate canonical page.

Which Type T installation arrangements are documented?

Published data documents hard-pipe installation Y and auto-coupled installation Z for this entry. It does not show the movable soft-pipe R arrangement here.

Why are both 60 Hz voltage records flagged?

Published data specifies three-phase 380 V +/-10% at both frequencies, while both current 60 Hz catalog records state three-phase 220 V. Confirm voltage before quotation.

Why do maximum-head values differ slightly by source?

At 60 Hz, published data table lists 12 m and 14 m, while the current catalog states 12.3 m and 14.2 m. Both source values remain visible for review.

Continue from published data to a reviewed selection

Confirm frequency, voltage and duty point.

← C 0.75-7.5 kW 2P Open C(T) in the selector →